ADVANTAGES OF KANY T-SLOT SYSTEM
This profile offers four t-slot openings and is used in general purpose applications for a wide array of use.
This profile has two openings for a fastener or accessory. Used in applications where a clean finished look is needed on the corner.
This profile has three openings for a fastener or accessory and one smooth side. Best suited when a clean look is needed on a single side.
This extrusion, which is lightweight and inexpensive, is nonetheless very sturdy and can be universally used for simpler structural designs. Outer casings, safety guards, laboratory rigs and smaller frameworks are all easy to construct using it.
With slots on all sides, this universally used lightweight extrusion is optimally constructed with regard to weight and strength. For lightweight enclosures and other small constructions, this is an inexpensive and sturdy extrusion.
The counterpart to the lightweight extrusion. It gives the designer plenty of scope for designing: trolleys, machine frames, load-bearing structures, etc.
For lightweight machine frames, protective guards, safety fencing, etc. Metal paneling sheets, as well as composite panels, acrylic glass panels and all-plastic panels up to 4 mm in thickness can be fixed in place into the panel slots on the face extrusion.
For lightweight machine frames, protective guards, safety fencing, etc. Metal panelling sheets, as well as composite panels, acrylic glass panels and all-plastic panels up to 4 mm in thickness can be fixed in place into the panel slots on the face extrusion.
Workstation design, enclosures, apparatus trolleys and more lightweight structures. This corner profile looks extremely compact because it is closed on two sides and is the natural choice in any application where only two slots are required for joining frame members or accessories.
Unique two slotted corner design accommodates panels up to 4mm thick while giving a nearly flush finish.
Versatile profile used for all types of structures including trolleys, conveyors, and lightweight base frames. Easily used in conjunction with 30, 40, 50 series. (Note: not Bosch compatible.)
Suitable for use as a cross beam or for building lightweight conveyor belts.
Mainly used as a brace. Leveling feet and casters can be attached using threaded inserts B33-60 or B33-64.
For use in clean room applications or where an exceptional cosmetic finish is required. Each slot is covered by a thin "rip off" slot that can be easily removed to provide access to the standard Kanya 8mm slot.
The C01-9 extrusion has the same properties as the MA1-3 bearing extrusion (50x150), with slightly lower load-bearing capability. Suitable for machine bases, frames, and general-purpose applications.
This versatile extrusion is particularly useful for structures which are subjected to heavy loads, and which span large widths. It can also be used as a multiple supply line for a variety of media.
These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money.
This profile has two openings for a fastener or accessory and two smooth sides. Best suited when a clean look is needed on a corner. These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for bases, frames, enclosures, guarding and general-purpose applications. Partially closed extrusions are particularly attractive in design, trap less dirt and can be used for a wide range of applications.
For all types of enclosures, as well as for structures with faces which are mainly closed and for applications that require an attractive design. These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for bases, frames, enclosures, and general-purpose applications.
This profile has three openings for a fastener or accessory and one smooth side. Best suited when a clean look is needed on a single side. These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for bases, frames, enclosures, guarding and general-purpose applications.
This lightweight extrusion can help to keep costs down! They can be used to create lightweight designs with excellent loadbearing capabilities. Suitable for lightweight frames, enclosures, guarding and general-purpose applications.
This profile can be used to hold liquids and gases, to bear loads, to take threads and lots more. It can be a perfect solution to very specific design challenges. With their 40 mm base, they complement extrusions with 20-, 30- and 50-mm bases perfectly. The extrusion itself is an excellent choice when more load carrying capacity is required and is hard to beat in terms of value for money. Suitable for machine bases, frames, enclosures, workstations, kan-ban trolleys, conveyors, and general-purpose applications.
This profile has four openings for a fastener or accessory and one smooth side. Best suited when a clean look is needed on a single side. With their 40 mm base, they complement extrusions with 20-, 30- and 50-mm bases perfectly. Suitable for machine bases, frames, enclosures, workstations, kan-ban trolleys, conveyors, and general-purpose applications.
This profile can be used to hold liquids and gases, to bear loads, to take threads and lots more. It can be a perfect solution to very specific design challenges. With their 40 mm base, they complement extrusions with 20-, 30- and 50-mm bases perfectly. The extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for machine bases, frames, enclosures, workstations, kan-ban trolleys and general-purpose applications.
For machine and apparatus frames which have to hold heavy weights, and which require strong corner components. They will also be compact and inexpensive. This profile provides a unique way to provide a strong corner.
This versatile extrusion is mainly used in machinery and plant construction and boasts the following qualities: high strength, excellent torsional rigidity and low weight.
An extremely sturdy extrusion which is used as a support, stand or manifold. Ideal for building gantries if used in combination with the 100x200 heavy duty extrusion, MA1–9
Ideal for building gantries in which the supports are spaced well apart or for any application where very heavy loads have to be borne with minimal bending.
An optimum extrusion for large gantries and stable cross-beams. Together with the extrusion MA1–9, large robust constructions can be created. Similar to the MA1–3, this extrusion is mainly used to support heavy loads because of its excellent load-bearing capacity
This base extrusion is normally used for crossbeams. Further, its optimized cross section means that it is ideal for an extremely wide range of applications. Suitable for heavy duty machine bases, test rigs and general applications.
The heavy-duty extrusion, like the A01–2 type base extrusion, is commonly used as a cross-beam. However, this design can also be used in many different applications combining excellent load-bearing capabilities and a lightweight structure
As the name suggests, this extrusion is mainly used to support heavy loads because of its excellent load-bearing characteristics. However, it is also an effective manifold extrusion. When heavy structural loads are required this is a good solution.
This style extrusion suitable for most design tasks thanks to the excellent weight and strength properties. The useful features include holes for direct threading and small guide slots to cover the openings in the extrusions with aluminum strips.
Corner and face extrusions are used in any applications where closed surfaces are required. The advantages of these are that they improve the appearance of the structures and also minimize the buildup of dirt. Extrusions can be fitted onto the closed faces by drilling holes in the outer face of the extrusion at the required points and using AC32–... type threaded plates. The small lugs inside the extrusion guide the plates.
Corner and face extrusions are used in any applications where closed surfaces are required. The advantages of these are that they improve the appearance of the structures and also minimize the buildup of dirt. Extrusions can be fitted onto the closed faces by drilling holes in the outer face of the extrusion at the required points and using AC32–... type threaded plates. The small lugs inside the extrusion guide the plates.
This style extrusion suitable for most design tasks thanks to the excellent weight and strength properties. When more strength is needed that the 50x50 base this is an excellent choice. The useful features include holes for direct threading and small guide slots to cover the openings in the extrusions with aluminum strips.
Rack mount profile allows 19" racking to be incorporated into electronic, pneumatic and hydraulic applications. Meets requirements of IEC297. For use with 50mm Kanya-style t-slot aluminum. Secure with H2-504 nut plates and H2-506 retaining clips.
This aluminum guide can be easily clipped into all slots of Base 50/40/30. With 30 base extrusions, a snap-in function prevents the guide from falling out. With 50/40 base extrusions, the guide is jammed in the slot. If necessary, a steel pin Ø 6 can also be used to increase rigidity.
Roller extrusion designed for use with B48-05 slot rollers or B48-10 concave roller. For light duty rolling application such as machine guarding doors. However, it can also be used as a frame extrusion to hold thick panels in place.
