Rack mount profile allows 19" racking to be incorporated into electronic, pneumatic and hydraulic applications. Meets requirements of IEC297. For use with 50mm Kanya-style t-slot aluminum. Secure with H2-504 nut plates and H2-506 retaining clips.
This aluminum guide can be easily clipped into all slots of Base 50/40/30. With 30 base extrusions, a snap-in function prevents the guide from falling out. With 50/40 base extrusions, the guide is jammed in the slot. If necessary, a steel pin Ø 6 can also be used to increase rigidity.
Roller extrusion designed for use with B48-05 slot rollers or B48-10 concave roller. For light duty rolling application such as machine guarding doors. However, it can also be used as a frame extrusion to hold thick panels in place.
This versatile extrusion is mainly used in machinery and plant construction and boasts the following qualities: high strength, excellent torsional rigidity and low weight.
An extremely sturdy extrusion which is used as a support, stand or manifold. Ideal for building gantries if used in combination with the 100x200 heavy duty extrusion, MA1–9
Ideal for building gantries in which the supports are spaced well apart or for any application where very heavy loads have to be borne with minimal bending.
The C01-9 extrusion has the same properties as the MA1-3 bearing extrusion (50x150), with slightly lower load-bearing capability. Suitable for machine bases, frames, and general-purpose applications.
This versatile extrusion is particularly useful for structures which are subjected to heavy loads, and which span large widths. It can also be used as a multiple supply line for a variety of media.
These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money.
This profile has two openings for a fastener or accessory and two smooth sides. Best suited when a clean look is needed on a corner. These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for bases, frames, enclosures, guarding and general-purpose applications. Partially closed extrusions are particularly attractive in design, trap less dirt and can be used for a wide range of applications.
For all types of enclosures, as well as for structures with faces which are mainly closed and for applications that require an attractive design. These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for bases, frames, enclosures, and general-purpose applications.
This profile has three openings for a fastener or accessory and one smooth side. Best suited when a clean look is needed on a single side. These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for bases, frames, enclosures, guarding and general-purpose applications.
This lightweight extrusion can help to keep costs down! They can be used to create lightweight designs with excellent loadbearing capabilities. Suitable for lightweight frames, enclosures, guarding and general-purpose applications.
This profile can be used to hold liquids and gases, to bear loads, to take threads and lots more. It can be a perfect solution to very specific design challenges. With their 40 mm base, they complement extrusions with 20-, 30- and 50-mm bases perfectly. The extrusion itself is an excellent choice when more load carrying capacity is required and is hard to beat in terms of value for money. Suitable for machine bases, frames, enclosures, workstations, kan-ban trolleys, conveyors, and general-purpose applications.
This profile has four openings for a fastener or accessory and one smooth side. Best suited when a clean look is needed on a single side. With their 40 mm base, they complement extrusions with 20-, 30- and 50-mm bases perfectly. Suitable for machine bases, frames, enclosures, workstations, kan-ban trolleys, conveyors, and general-purpose applications.
This profile can be used to hold liquids and gases, to bear loads, to take threads and lots more. It can be a perfect solution to very specific design challenges. With their 40 mm base, they complement extrusions with 20-, 30- and 50-mm bases perfectly. The extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for machine bases, frames, enclosures, workstations, kan-ban trolleys and general-purpose applications.
An optimum extrusion for large gantries and stable cross-beams. Together with the extrusion MA1–9, large robust constructions can be created. Similar to the MA1–3, this extrusion is mainly used to support heavy loads because of its excellent load-bearing capacity
This base extrusion is normally used for crossbeams. Further, its optimized cross section means that it is ideal for an extremely wide range of applications. Suitable for heavy duty machine bases, test rigs and general applications.
The heavy-duty extrusion, like the A01–2 type base extrusion, is commonly used as a cross-beam. However, this design can also be used in many different applications combining excellent load-bearing capabilities and a lightweight structure
As the name suggests, this extrusion is mainly used to support heavy loads because of its excellent load-bearing characteristics. However, it is also an effective manifold extrusion. When heavy structural loads are required this is a good solution.
This style extrusion suitable for most design tasks thanks to the excellent weight and strength properties. The useful features include holes for direct threading and small guide slots to cover the openings in the extrusions with aluminum strips.
Corner and face extrusions are used in any applications where closed surfaces are required. The advantages of these are that they improve the appearance of the structures and also minimize the buildup of dirt. Extrusions can be fitted onto the closed faces by drilling holes in the outer face of the extrusion at the required points and using AC32–... type threaded plates. The small lugs inside the extrusion guide the plates.
Corner and face extrusions are used in any applications where closed surfaces are required. The advantages of these are that they improve the appearance of the structures and also minimize the buildup of dirt. Extrusions can be fitted onto the closed faces by drilling holes in the outer face of the extrusion at the required points and using AC32–... type threaded plates. The small lugs inside the extrusion guide the plates.
This style extrusion suitable for most design tasks thanks to the excellent weight and strength properties. When more strength is needed that the 50x50 base this is an excellent choice. The useful features include holes for direct threading and small guide slots to cover the openings in the extrusions with aluminum strips.
For machine and apparatus frames which have to hold heavy weights, and which require strong corner components. They will also be compact and inexpensive. This profile provides a unique way to provide a strong corner.
This profile offers four t-slot openings and is used in general purpose applications for a wide array of use.
This profile has two openings for a fastener or accessory. Used in applications where a clean finished look is needed on the corner.
This profile has three openings for a fastener or accessory and one smooth side. Best suited when a clean look is needed on a single side.
This extrusion, which is lightweight and inexpensive, is nonetheless very sturdy and can be universally used for simpler structural designs. Outer casings, safety guards, laboratory rigs and smaller frameworks are all easy to construct using it.
With slots on all sides, this universally used lightweight extrusion is optimally constructed with regard to weight and strength. For lightweight enclosures and other small constructions, this is an inexpensive and sturdy extrusion.
The counterpart to the lightweight extrusion. It gives the designer plenty of scope for designing: trolleys, machine frames, load-bearing structures, etc.
For lightweight machine frames, protective guards, safety fencing, etc. Metal paneling sheets, as well as composite panels, acrylic glass panels and all-plastic panels up to 4 mm in thickness can be fixed in place into the panel slots on the face extrusion.
For lightweight machine frames, protective guards, safety fencing, etc. Metal panelling sheets, as well as composite panels, acrylic glass panels and all-plastic panels up to 4 mm in thickness can be fixed in place into the panel slots on the face extrusion.
Workstation design, enclosures, apparatus trolleys and more lightweight structures. This corner profile looks extremely compact because it is closed on two sides and is the natural choice in any application where only two slots are required for joining frame members or accessories.
Unique two slotted corner design accommodates panels up to 4mm thick while giving a nearly flush finish.
Versatile profile used for all types of structures including trolleys, conveyors, and lightweight base frames. Easily used in conjunction with 30, 40, 50 series. (Note: not Bosch compatible.)
Suitable for use as a cross beam or for building lightweight conveyor belts.
Mainly used as a brace. Leveling feet and casters can be attached using threaded inserts B33-60 or B33-64.
For use in clean room applications or where an exceptional cosmetic finish is required. Each slot is covered by a thin "rip off" slot that can be easily removed to provide access to the standard Kanya 8mm slot.
Series 20 standard profile. This profile has four 8mm t-slot openings and can be used for many applications. Series 20 profiles are typically for general purpose light-duty use.
Bosch part #3842517173
Series 20x40 standard profile. This profile has six 8mm t-slot openings. This light duty profile is versatile in that it offers two mounting slots per face as well as one mounting slot per end. This profile has an interior channel which can be used as an air manifold.
Bosch part #3842517178
This profile is a cost effective solution where heavy loading is not a concern. Suitable for lightweight frames, guarding and general purpose.
Series 30 single t-slot profile. This series offers one 8mm t-slot opening and three smooth sides for a cleaner finish when desired.
Bosch part #3842557218
Series 30 double face profile. Two 8mm t-slot openings that are opposite each other as well as two smooth sides opposite each other. This profile is suitable for use on framing panels to offer a clean look on the front and back.
Bosch part #3842557230
Series 30 corner profile. Two 8mm t-slots adjacent to each other. For use in applications that require a cleaner finish on the corners of frames or panels.
Bosch part #3842557219
Series 30 face profile. Three 8mm t-slot openings as well as one smooth side. These are suitable for framing applications where it is desirable to have a clean look on a single side.
Bosch part #3842557221
Series 30x60 standard t-slot aluminum extrusion profile. This profile features six 8mm t-slot openings for applications that require more strength. There are two mounting slots per face, one mounting slot for each end and an interior channel which may be utilized as an air manifold if desired. For lighter duty application than the BSB 40x80.
Bosch part #3842557215
Series 40x120 profile. This profile offers eight total openings for a t-slot fastener. The 40x120 profile is great for heavy-duty applications for areas that need extra strength. Great for work benches and machine bases or for use in linear motion applications.
Bosch part #3842529344
Series 40 standard profile. This profile offers four 10mm t-slot openings and is used for general-purpose applications for a wide array of uses.
Bosch part #3842529340
Series 40x80 profile. This profile features six openings for a t-slot fastener. These are used in an application requiring a bit more strength and stiffness. Also includes two mounting slots for each face and one mounting slot per end. An interior channel on this profile can be used as an air manifold.
Bosh part #3842529342
Series 45 standard profile. Our most popular profile. Four 10mm t-slot openings for numerous applications. General purpose, medium-duty applications.
Bosch part #3842553621
Series 45 lightweight profile. Four openings for a t-slot fastener or accessory. Suitable for applications requiring less strength or stiffness than a standard 45 profile.
Bosch #3842553618
Series 45 x 90 standard profile. Six 10mm t-slot openings. Heavy duty profile for applications requiring high strength or stiffness. Two mounting slots per face and one mounting slot per end. The interior channel may be utilized as an air manifold.
Bosch part #3842553622
Series 45 x 90 standard profile. Six 10mm t-slot openings. Heavy duty profile for applications requiring high strength or stiffness. Two mounting slots per face and one mounting slot per end. The interior channel may be utilized as an air manifold.
Bosch part #3842553619
Series 90 lightweight profile. This profile is lighter than the regular 90x90 profile. It offers eight 10mm t-slot openings and can be used in applications that need extra t-slot openings without the added weight.
Bosch part #3842553620
The 1.5″ x 1.5″ shape has a thicker wall that will accommodate heavier applications than the 1.5″ x 1.5″L. Applications include machine frames, workstations, shop carts, tables and machine retrofts. 100% compatible with the following extrusions: 80/20 1515-S and T-SLOTS #650005.
The 1.5″ x 3.0″ shape is designed for larger and heavier structures where strength is required. Applications for 1.5″x3.0″ include framing systems, roller conveyor systems, fixturing, specialty machines, supports, linear slides and automated assembly systems. This shape can be used to run air lines or as a pressure or vacuum manifold up to 150 p.s.i.
100% compatible with the following: 80/20 extrusion #1530-S and T-SLOTS #650008.
The 1” x 1” extrusion has four open T-Slots on each side of its 1” frame. Available in smooth or grooved, this profile is great for machine guards, workbenches, displays, and more. The four open T-Slots allow for easy accessory mounting.
100% Compatible with: 80/20 #1010-S, Faztek #10QE1010, McMaster #60585K102
Smooth-sided t-slot profile where aesthetics or cleanliness are required. For machine guarding, work benches, sound enclosures and mounting devices.
This extrusion is 100% compatible with the following manufacturers: 80/20 #1020-S, T-SLOTS #650002 and McMaster #47065T107
This profile offers four t-slot openings and is used in general purpose applications for a wide array of use.
This profile has two openings for a fastener or accessory. Used in applications where a clean finished look is needed on the corner.
This profile has three openings for a fastener or accessory and one smooth side. Best suited when a clean look is needed on a single side.
This extrusion, which is lightweight and inexpensive, is nonetheless very sturdy and can be universally used for simpler structural designs. Outer casings, safety guards, laboratory rigs and smaller frameworks are all easy to construct using it.
With slots on all sides, this universally used lightweight extrusion is optimally constructed with regard to weight and strength. For lightweight enclosures and other small constructions, this is an inexpensive and sturdy extrusion.
The counterpart to the lightweight extrusion. It gives the designer plenty of scope for designing: trolleys, machine frames, load-bearing structures, etc.
For lightweight machine frames, protective guards, safety fencing, etc. Metal paneling sheets, as well as composite panels, acrylic glass panels and all-plastic panels up to 4 mm in thickness can be fixed in place into the panel slots on the face extrusion.
For lightweight machine frames, protective guards, safety fencing, etc. Metal panelling sheets, as well as composite panels, acrylic glass panels and all-plastic panels up to 4 mm in thickness can be fixed in place into the panel slots on the face extrusion.
Workstation design, enclosures, apparatus trolleys and more lightweight structures. This corner profile looks extremely compact because it is closed on two sides and is the natural choice in any application where only two slots are required for joining frame members or accessories.
Unique two slotted corner design accommodates panels up to 4mm thick while giving a nearly flush finish.
Versatile profile used for all types of structures including trolleys, conveyors, and lightweight base frames. Easily used in conjunction with 30, 40, 50 series. (Note: not Bosch compatible.)
Suitable for use as a cross beam or for building lightweight conveyor belts.
Mainly used as a brace. Leveling feet and casters can be attached using threaded inserts B33-60 or B33-64.
For use in clean room applications or where an exceptional cosmetic finish is required. Each slot is covered by a thin "rip off" slot that can be easily removed to provide access to the standard Kanya 8mm slot.
The C01-9 extrusion has the same properties as the MA1-3 bearing extrusion (50x150), with slightly lower load-bearing capability. Suitable for machine bases, frames, and general-purpose applications.
This versatile extrusion is particularly useful for structures which are subjected to heavy loads, and which span large widths. It can also be used as a multiple supply line for a variety of media.
These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money.
This profile has two openings for a fastener or accessory and two smooth sides. Best suited when a clean look is needed on a corner. These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for bases, frames, enclosures, guarding and general-purpose applications. Partially closed extrusions are particularly attractive in design, trap less dirt and can be used for a wide range of applications.
For all types of enclosures, as well as for structures with faces which are mainly closed and for applications that require an attractive design. These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for bases, frames, enclosures, and general-purpose applications.
This profile has three openings for a fastener or accessory and one smooth side. Best suited when a clean look is needed on a single side. These versatile extrusions can be used for all kinds of structures. With their 40 mm base, they complement extrusions with 20, 30 and 50 mm bases perfectly. The base extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for bases, frames, enclosures, guarding and general-purpose applications.
This lightweight extrusion can help to keep costs down! They can be used to create lightweight designs with excellent loadbearing capabilities. Suitable for lightweight frames, enclosures, guarding and general-purpose applications.
This profile can be used to hold liquids and gases, to bear loads, to take threads and lots more. It can be a perfect solution to very specific design challenges. With their 40 mm base, they complement extrusions with 20-, 30- and 50-mm bases perfectly. The extrusion itself is an excellent choice when more load carrying capacity is required and is hard to beat in terms of value for money. Suitable for machine bases, frames, enclosures, workstations, kan-ban trolleys, conveyors, and general-purpose applications.
This profile has four openings for a fastener or accessory and one smooth side. Best suited when a clean look is needed on a single side. With their 40 mm base, they complement extrusions with 20-, 30- and 50-mm bases perfectly. Suitable for machine bases, frames, enclosures, workstations, kan-ban trolleys, conveyors, and general-purpose applications.
This profile can be used to hold liquids and gases, to bear loads, to take threads and lots more. It can be a perfect solution to very specific design challenges. With their 40 mm base, they complement extrusions with 20-, 30- and 50-mm bases perfectly. The extrusion itself is extraordinarily sturdy and is hard to beat in terms of value for money. Suitable for machine bases, frames, enclosures, workstations, kan-ban trolleys and general-purpose applications.
For machine and apparatus frames which have to hold heavy weights, and which require strong corner components. They will also be compact and inexpensive. This profile provides a unique way to provide a strong corner.
This versatile extrusion is mainly used in machinery and plant construction and boasts the following qualities: high strength, excellent torsional rigidity and low weight.
An extremely sturdy extrusion which is used as a support, stand or manifold. Ideal for building gantries if used in combination with the 100x200 heavy duty extrusion, MA1–9
Ideal for building gantries in which the supports are spaced well apart or for any application where very heavy loads have to be borne with minimal bending.
An optimum extrusion for large gantries and stable cross-beams. Together with the extrusion MA1–9, large robust constructions can be created. Similar to the MA1–3, this extrusion is mainly used to support heavy loads because of its excellent load-bearing capacity
This base extrusion is normally used for crossbeams. Further, its optimized cross section means that it is ideal for an extremely wide range of applications. Suitable for heavy duty machine bases, test rigs and general applications.
The heavy-duty extrusion, like the A01–2 type base extrusion, is commonly used as a cross-beam. However, this design can also be used in many different applications combining excellent load-bearing capabilities and a lightweight structure
As the name suggests, this extrusion is mainly used to support heavy loads because of its excellent load-bearing characteristics. However, it is also an effective manifold extrusion. When heavy structural loads are required this is a good solution.
This style extrusion suitable for most design tasks thanks to the excellent weight and strength properties. The useful features include holes for direct threading and small guide slots to cover the openings in the extrusions with aluminum strips.
Corner and face extrusions are used in any applications where closed surfaces are required. The advantages of these are that they improve the appearance of the structures and also minimize the buildup of dirt. Extrusions can be fitted onto the closed faces by drilling holes in the outer face of the extrusion at the required points and using AC32–... type threaded plates. The small lugs inside the extrusion guide the plates.
Corner and face extrusions are used in any applications where closed surfaces are required. The advantages of these are that they improve the appearance of the structures and also minimize the buildup of dirt. Extrusions can be fitted onto the closed faces by drilling holes in the outer face of the extrusion at the required points and using AC32–... type threaded plates. The small lugs inside the extrusion guide the plates.
This style extrusion suitable for most design tasks thanks to the excellent weight and strength properties. When more strength is needed that the 50x50 base this is an excellent choice. The useful features include holes for direct threading and small guide slots to cover the openings in the extrusions with aluminum strips.
Rack mount profile allows 19" racking to be incorporated into electronic, pneumatic and hydraulic applications. Meets requirements of IEC297. For use with 50mm Kanya-style t-slot aluminum. Secure with H2-504 nut plates and H2-506 retaining clips.
This aluminum guide can be easily clipped into all slots of Base 50/40/30. With 30 base extrusions, a snap-in function prevents the guide from falling out. With 50/40 base extrusions, the guide is jammed in the slot. If necessary, a steel pin Ø 6 can also be used to increase rigidity.
Roller extrusion designed for use with B48-05 slot rollers or B48-10 concave roller. For light duty rolling application such as machine guarding doors. However, it can also be used as a frame extrusion to hold thick panels in place.
Series 20 standard profile. This profile has four 8mm t-slot openings and can be used for many applications. Series 20 profiles are typically for general purpose light-duty use.
Bosch part #3842517173
Series 20x40 standard profile. This profile has six 8mm t-slot openings. This light duty profile is versatile in that it offers two mounting slots per face as well as one mounting slot per end. This profile has an interior channel which can be used as an air manifold.
Bosch part #3842517178
This profile is a cost effective solution where heavy loading is not a concern. Suitable for lightweight frames, guarding and general purpose.
Series 30 single t-slot profile. This series offers one 8mm t-slot opening and three smooth sides for a cleaner finish when desired.
Bosch part #3842557218
Series 30 double face profile. Two 8mm t-slot openings that are opposite each other as well as two smooth sides opposite each other. This profile is suitable for use on framing panels to offer a clean look on the front and back.
Bosch part #3842557230
Series 30 corner profile. Two 8mm t-slots adjacent to each other. For use in applications that require a cleaner finish on the corners of frames or panels.
Bosch part #3842557219
Series 30 face profile. Three 8mm t-slot openings as well as one smooth side. These are suitable for framing applications where it is desirable to have a clean look on a single side.
Bosch part #3842557221
Series 30x60 standard t-slot aluminum extrusion profile. This profile features six 8mm t-slot openings for applications that require more strength. There are two mounting slots per face, one mounting slot for each end and an interior channel which may be utilized as an air manifold if desired. For lighter duty application than the BSB 40x80.
Bosch part #3842557215
Series 40x120 profile. This profile offers eight total openings for a t-slot fastener. The 40x120 profile is great for heavy-duty applications for areas that need extra strength. Great for work benches and machine bases or for use in linear motion applications.
Bosch part #3842529344
Series 40 standard profile. This profile offers four 10mm t-slot openings and is used for general-purpose applications for a wide array of uses.
Bosch part #3842529340
Series 40x80 profile. This profile features six openings for a t-slot fastener. These are used in an application requiring a bit more strength and stiffness. Also includes two mounting slots for each face and one mounting slot per end. An interior channel on this profile can be used as an air manifold.
Bosh part #3842529342
Series 45 standard profile. Our most popular profile. Four 10mm t-slot openings for numerous applications. General purpose, medium-duty applications.
Bosch part #3842553621
Series 45 lightweight profile. Four openings for a t-slot fastener or accessory. Suitable for applications requiring less strength or stiffness than a standard 45 profile.
Bosch #3842553618
Series 45 x 90 standard profile. Six 10mm t-slot openings. Heavy duty profile for applications requiring high strength or stiffness. Two mounting slots per face and one mounting slot per end. The interior channel may be utilized as an air manifold.
Bosch part #3842553622
Series 45 x 90 standard profile. Six 10mm t-slot openings. Heavy duty profile for applications requiring high strength or stiffness. Two mounting slots per face and one mounting slot per end. The interior channel may be utilized as an air manifold.
Bosch part #3842553619
The 1” x 1” extrusion has four open T-Slots on each side of its 1” frame. Available in smooth or grooved, this profile is great for machine guards, workbenches, displays, and more. The four open T-Slots allow for easy accessory mounting.
100% Compatible with: 80/20 #1010-S, Faztek #10QE1010, McMaster #60585K102
Smooth-sided t-slot profile where aesthetics or cleanliness are required. For machine guarding, work benches, sound enclosures and mounting devices.
This extrusion is 100% compatible with the following manufacturers: 80/20 #1020-S, T-SLOTS #650002 and McMaster #47065T107
The 1.5″ x 1.5″ shape has a thicker wall that will accommodate heavier applications than the 1.5″ x 1.5″L. Applications include machine frames, workstations, shop carts, tables and machine retrofts. 100% compatible with the following extrusions: 80/20 1515-S and T-SLOTS #650005.
The 1.5″ x 3.0″ shape is designed for larger and heavier structures where strength is required. Applications for 1.5″x3.0″ include framing systems, roller conveyor systems, fixturing, specialty machines, supports, linear slides and automated assembly systems. This shape can be used to run air lines or as a pressure or vacuum manifold up to 150 p.s.i.
100% compatible with the following: 80/20 extrusion #1530-S and T-SLOTS #650008.
